360 blend

Just let it all out, buddy. You're among friends here.
Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: 360 blend

Post by Zoltán »

Ideally you don't need to change the input, and output aspects or make them different.
Arrange the projectors so they are overlapping, the more this is accurate, the easier it will be to make the blends perfect.

Create slices in your Input Selection, which are aspect of your projectors, make them fill your projector output keeping the aspect.
Move the slices in the Input selection, so they are overlapping about the same as the projectors.
Then you can fine tune the projector output in the Output transformation.
The last step is to enable soft edge on the slices, and fine tune the blend if necessary.

You can also use two slices for the last projector, for the left and right side blends, so it can be easier to fine tune both blends.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Blusound
Is taking Resolume on a second date
Posts: 33
Joined: Sun Jan 24, 2016 17:39

Re: 360 blend

Post by Blusound »

Thank you
ideed it works!
Leonardo

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: 360 blend

Post by Zoltán »

Great to hear that Leonardo! ;)
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply