I wish a more programable chaos like sequential, and the posibilitlity to separate decks for each layer.
And set the transparency on each channel instead layers (specific clips need some particular transparency)
Thanks for listen us, bart & ed!
Not, levon, you can set any channel to layer 1, anothers to layer 2, etc... but can't set decks for each layer. The decks you set contain all clips to used when switch to it on the layers.
My idea is set decks for each layer, then you can put 80 backgrounds loops on deck 1 to 4 (for example) and set to layer 1, put 20 text loops on deck 5 and set to layer 2, and finally put 40 vector loops on deck 6 to 8 and set to layer 3. Each layer with their own "Deck time switch" and "channel time switch" and eliminate the "layer time switch"
I hope that my explain will be clearly.
it would also be nice if there's a possibility to set the switch-time like effects or at least intervald...
i thought about this:
switching the video every 24 cycle @ 180bpm would mean 1333ms
so i can set it from 1333 to 1333, but not 1333 + 2666 for example...