do you ship to germany?
do you accept paypal?
hi, do you have any information about, is it possible to set the keypad buttons of uc-16 like uc-33?Originally posted by Anonymous
you can use the buttons on the uc33 in resolume but you've got to assign notes to them first. I can post an "howto" on that topic if you want...
RiotDontDiet
[Edited on 30-4-2005 by gpvillamil]Originally posted by Anonymous
Ok, in order to use the Buttons on the UC33 Midi-Controller in Resolume (for playing Clips, bypassing effect layers etc.) you need to assign them to notes. Therefore you've got to do the following:
1. Press the button you want to programm
2. Press "ASSIGN" and enter 147 (that's the controller number for notes)
3. Press the "Data MSB" button twice and enter 100
4. Press the "Data LSB" button twice and enter 000
5. Press the "PROGRAM" button twice and enter the Midi-Number for notes you want to assign to the button (doesn't really matter which note you choose, you can start with 01 and assign the rest of the keys to 02, 03, 04, etc.)
6. Choose the next button you want to program and start with 1) again
7. When you're finished Store the Program, push "STORE" and enter the number where you want to safe it (usually no 33 is preset for custom programming)
When you're done with that, load the number 33 (press "RECALL and enter 33) and simply choose the function in Resolume preferences and press the button you want to assign to it...done!
greetz,
RiotDon'tDiet!