I was perusing the manual for the epson projectors we have on order and I came across this interesting feature: https://files.support.epson.com/docid/c ... ainer.html
Where essentially using only the projector built-in software (in a networked environment), seemingly independent of the VGA Card or resolume's capabilities, you may tile up to 9 projectors into one large screen.
----
The questions then becomes:
1. Does this mean that 9 Epson projectors TILED together only needs ONE HDMI/DP OUTPUT of resolution (9 x (1920 x 1200)).
2. And therefore only a single signal cable is fed to the MASTER projector. The other 8 projectors will get their signal from the master projector via the network (or by magic).
----
If this is true, then it is mind-blowing because one GTX1080 can handle theoretically up to (4 x 9) or 36 Epson projectors without using other hardware.
Has anyone tried this feature in an epson projector (any Epson reps hanging around here)? It sounds too good to be true.
----
PS. This particular Epson projector also has built in edge blending feature so you can edge blend the 9 projectors by only using the internal menu of the projectors before firing up Resolume.