Hi guys,
For my next show I’ll use 3 Christie Boxer 4K 30,000 lumens.
I’m pretty excited but I’d like to make sure I use to full potential without compromising the flow of the gig.
The content will be custom made and of course in DXV format with uncompressed audio.
The plan is to stack two of them to double the light, we’re throwing on a dark red brick wall with six windows. Or blend 2 projectors in a 3840 wide x 3888 h with 20% blend plus the third if we go this way.
The third projector will point the ceiling and the idea is to create a cool visual effect.
I’m finally building a brand new server following Oaktown and Arvol advices;
ASUS x99 deluxe II
i7 - 6850
32 gb ram
1080 Ti ASUS turbo
Istar USA D400
M.2 Samsung evo 960 for content
Ssd 250gb Samsung 860 for Windows 10
Black magic mini recorder for live feed 1080p.
I’d like to control the parameters from the Ethernet lan through the Christie software.
I’d like to use my two display port for the signal, one for the two stacked and looping the second.
And the second DP for the third projector.
Composition 3840 x 4670 at 60hz.
Any advice?
Which Ethernet switch should I buy?
In case the display port direct is not feasible can I use my Atlona 70ps to go straight into the Christie?
I’m powering everything with 150A distro. Theatrics is the one to rent.
Thank you in advance!
On the following link a very short video about the concept.
https://www.dropbox.com/s/4tb46ghjswa8e ... M.MOV?dl=0