Hi !
I know that everybody will give me the advice to buy the Datapath x4, but like I said in another post, I don't have the budget for 1 or 2 Datapath.
So, instead of buying 2 GTX 1060 card, I'm considering getting only one card (GTX 1060 6 GB) with 2 TripleHead2Go Digital SE. I know that some people has some bad experience with it, and some have a good one.
I need to connect 6 Epson 535w projector at 1280x800 + control, so 2 TripleHead2Go in 2 DP ports would give me the 6 required ports for the projector, and I will have 1 HDMI and 1 DVI available.
From what I read, I'm not 100% sure that 2 Digital SE is supported with 3 monitors each, but it's not clear on the website. Just read: http://www.matrox.com/graphics/fr/produ ... iple_gxms/ . At the bottom, it's not written Triple + Triple, but I don't understand why it wouldn't work.
At first, I wanted to use some HDMI to SDI converter, but it will be hard to find a converter that support 1280x800. They all seems to support 16:9 resolution only.
My other option is using CAT5-6 extenders... and there's also HDBaseT extenders. Should I run HDBaseT or not ?
So my question is what kind of problems I may experience with a GTX 1060 6 GB with 2 DP ports each connected to a TripleHead2Go Digital SE (so 2 TripleHead2Go), each ports of it connected to a HDMI extender (HDBaseT or not), each connected to a Epson 535W projector ? I will be running Windows 10 Pro.
Thank you !