Is there a way to insert decimal places into resolume as a resolution? Our wall is 2400x1485 so it wont fit in a 1080p 16x9 box, so I had to squish it to 1744.8x1079.595 (which is 72.7% of the full resolution of the wall) then upscale it at the brompton. But resolume keeps trying to round it up to 1...

Update! Everythings is up and running, it was just an issue with the drive not actually saving some of the IP configs changed I made for the 4th universe on each port lol. I really wish they would put the IP fields in the web portal so that I wouldn't have to make so many runs to the rack lol. Thank...

Rule of thumb from EVERY major LD I've worked with is to set your Artnet IP to the following: IP: 2.0.0.xxx Subnet: 255.0.0.0 Gateway: Blank or 2.0.0.1 (If you have a console on that address) The whole 10.xxx.xxx.xxx was some weirdness that popped up like 5-6 years ago and not sure why it's stuck. ...

I own a LOT of these lol. Set your PC IP to the same range as the the your controller. I use 2.0.0.100 for my PC and I set my controllers to be 2.0.0.200 - 2.0.0.220 (Subnet should be 255.0.0.0 and gateway can be blank or 2.0.0.1) Turn off any firewalls you may have. Use an unmanaged switch. Plug i...

Moving my epix setup from madmapper to resolume arena. I was using sACN with madmapper but going to resolume means I'm moving to artnet. Changed the modes on the drive2000IP and set my ip's to 10.10.12.299...etcc for each strip (same range as the pc on a switch with just the PC, my artnet node, and ...

Here's what I was looking at for a part list so lmk if you would recommend any changes. Mag z590 Motherboard i7 10700K CPU (would've gone AMD since as you said its typically better value but this was actually a better deal where I found it) 3070 32gb Vengeance Ram Samsung 970 EVO+ (also using Synolo...

Need advice on a GPU/CPU/Ram combo for the PC that I'm building to run resolume arena at our house of worship, our plans are to take 2 1080p inputs from propresenter (our lyric/text/presentation software) and send a feed out to our video wall (total of 3,564,000 pixels [thor ridge 2.5]) and a 1080p ...