Hi,
in audio settings, I can't choose the desired input device (e.g a webcam mic)
I'm able to choose some devices which are visible (which I don't want, e.g. rift audio) , most are not .
There not greyed out or something, I can click on them but they don't stay activated.
What could be the reason ?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
In Windows, using mic is allowed for desktop apps including Resolume
But, yes indeed there's an error message in the log file concerning sample rate,
but unfortunately I can't change the output sample rate in Resolume: There's only one possible value: 48000
And in windows device manager there's no sample rate setting either in USB microphone (from cam) settings
Any ideas how to solve this ?
Under Audio Output Device - If I selected the device under listed under Windows Audio, no go. I had to select the Output device as listed under Direct Sound, I could then choose devices under Audio Input. When attempting to use the device listed under Windows audio it would change my buffer size, clear my Input device, then not allow me to choose an input. They were listed, but selecting them didnt give me audio in, and clicking on the drop down listed the inputs, but kept no input selected.
My Win10 on that computer just updated, and I just installed the new 7.2.1 update. I believe it was the windows update that changed my windows sound to Direct Sound, as audio in multiple apps needed to be resetup.
You might be able to change the sample rate of your Output device to match your webcam, in the windows audio device settings.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Try selecting an output device first, and also make sure both the input and output have the same sample rate set in the Device settings.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu