WIRE Envelop Double Triggers

Post your questions here and we'll all try to help.
Post Reply
User avatar
elecdashtron
Is taking Resolume on a second date
Posts: 26
Joined: Thu Feb 08, 2018 00:06

WIRE Envelop Double Triggers

Post by elecdashtron »

I am getting very strange behavior from the Envelop module in WIRE.

I have a custom oscillator
(adds 1 to itself ever 0.25 seconds, the output is MOD X and if MODx-1 it triggers)
This is fed into the trigger input of an envelop mofule. It triggers fine, but when i hook up the Envelops output to, for example, the radius of a circle, the circle DOUBLE POPS before shrinking.
Capture.JPG
Here is a video example
https://drive.google.com/file/d/1OKDYF8 ... sp=sharing

The wire patch is here

https://drive.google.com/file/d/189jxMZ ... sp=sharing

Note when i manually trigger the envelop the circle Pops once as intended.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: WIRE Envelop Double Triggers

Post by Zoltán »

If you hover your mouse over the outlet of the Onchange node, you can see it switches to True, then to False quickly. Those are two triggers, so it starts the Attack-release twice quickly.
Try inserting an If node from logic after OnChange, and use only the True output.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
elecdashtron
Is taking Resolume on a second date
Posts: 26
Joined: Thu Feb 08, 2018 00:06

Re: WIRE Envelop Double Triggers

Post by elecdashtron »

Zoltán wrote: Mon Jun 14, 2021 08:10 Try inserting an If node from logic after OnChange, and use only the True output.
Great that worked thankyou

Post Reply