Custom OSC out

Just let it all out, buddy. You're among friends here.
Post Reply
ibox
Met Resolume in a bar the other day
Posts: 1
Joined: Tue Aug 24, 2021 22:17

Custom OSC out

Post by ibox »

Hi!

I want to send a custom OSC command to a lighting console each time I trigger a clip, this way each clip is accompanied with a different lighting.

I managed to send the custom command, but I can't set the value, when the clip is deactivated the command is sent with value 1 and when it is activated the command is sent with value 3. And the console works with value 0 & 1.

Also when I change the command to a custom one the clip still shows the old command in white letters, instead of the custom command.

How can I define the custom value in addition to the osc arguments?

Many Thanks

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Custom OSC out

Post by Zoltán »

Clip trigger sends 5 states,
0= empty slot,
1=clip present, not connected or previewed
2=clip previewed, but not connected
3=connected, but not previewed,
4=clip previewed and connected.

Arguments can't be changed currently.

The highlighted items show the expected input command for the item, these are hard coded, and can't be changed.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply