Hey, so I got a situation where I've got a Datapath x4 (DVI ver) having odd issues with 4 SDI runs.
Datapath
https://www.bhphotovideo.com/c/product/ ... html/specs
SDI conversion boxes
https://www.amazon.com/Blackmagic-Desig ... F7R9V5M9SY
I have 4 Single link DVI to HDMI cables going into each of these black magic boxes.
The odd issue is that at random I get flickering on one of the 4 projectors the runs are being sent to. If I swap that black magic box with Decimator and run it in interlace mode the problem run will start working..
Decimator
https://www.amazon.com/Decimator-MD-HX- ... P1JM4RCACY
So the question is why does this happen and why would running it in interlace fix it. Is it a bandwidth issue or a datapath issue??
I'm not sure if its a specific run issue if the flickering can happen on any of the runs every time I power cycle the datapath..