Keep in mind that you'll have to set it up to work that way and it's not straight forward but if you search the forum you'll find some threads on the topic.
Hi . I'm trying to get my decklink duo working with resolume and I can get only one output to work at a time and also only when I select pal or ntsc as the output format.
Is this correct?
Any tips on correct settings on outputs to use decklink successfully with resolume would be much appreciated.
Thanks
Cormac
P. s. I am aware of the correct connector settings on the decklink card for the sdi outputs .
How do your settings look like now?
Could you please send us the Resolume log file via the feedback tab in preferences?
Thanks!
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
BMD cards are a pain but they work. Last time I used one I spent 3 hours trying out various drivers until I found one that worked (This was in 2020). Once they're up and running they should be pretty stable. It's a LOT of work in their software to configure and minimal work in Resolume. The outputs will not be sync'd FYI.