Hi Guys,
I have a show via data path set to 3840x2160
I need to set up 4 projectors via CAT6 on separate walls.
Each projector is WUXGA and it'll be mounted on its side (portrait mode).
(I've already tested them for 12 hours, and apparently, they don't go off)
Now, I'm not sure which workflow to use.
SETUP time is about 8 hours.
Each wall is slightly curved inside (See attached file A)
And we will have a physical shape on the front (See B)
We have on board a CGI artist not familiar with mapping.
I and others Resolume users have evaluated some solutions, but I'm always open to someone who maybe had similar projects.
We've been talking pros and cons about slices, mask, input mask, and polygon... but I'm not sure if giving the height and distance and lens of the projector to the animator can help, once on location adjust the position until it's perfect it's the best and fastest way to go.
Any Tip?
(Ta make fit 1920x1200 into the data path... should I force the resolution with switchRes ?
Thank you in advance, these covid years made me again a newbie
Best,