triggering clip in different layer

Post your questions here and we'll all try to help.
Post Reply
jamalofearth
Met Resolume in a bar the other day
Posts: 8
Joined: Mon Nov 22, 2021 17:18

triggering clip in different layer

Post by jamalofearth »

Hello, 

I have an art installation tomorrow and am looking for advice on my resolume composition. Here is my setup...

- 2 layers
- 10 clips each
- all clips are between 15-30 seconds
- both layers are on autoplay random 
- all clips are full resolution with different blend modes which creates a video collage 

I would like to have certain clips to play without a second clip at the same time. My idea was to trigger a certain blank clip with the clip I would like to play solo that both match on play time. 

Example...

- Layer 1, Clip 10, 15 seconds, I would like to play this solo without any clip from layer 2. 
- I create a new blank clip, Layer 2, Clip 11, 15 seconds
- Create a trigger from layer 1 clip 10 to layer 2 clip 11. 
- They are both the same time so once they finish, it goes back to random 

I dont see how this is possible now because trigger clip only works on the same layer.

Is there another solution for this?

Thank you in advance. 

Zoltán
Team Resolume
Posts: 7106
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: triggering clip in different layer

Post by Zoltán »

Layer 2 clips, if they are not transparent, will hide layer 1 content.
Try moving the Layer2 opacty fader to 100% and playing something.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply