Resolume Arena mapping led strip WS2812 problem,plaese help

Post your questions here and we'll all try to help.
Post Reply
gmax85
Met Resolume in a bar the other day
Posts: 1
Joined: Sun May 14, 2023 14:32

Resolume Arena mapping led strip WS2812 problem,plaese help

Post by gmax85 »

Hello,I'm new member,I have controller K16000s and led strip ws2812 144 led/m and i've conected 16 led strips with diferent sizes to the controler,so i need to controll each size through conected controler channel. When i go to Advanced section to do the mapping,i can't get other channels to work,just the first channel,for example,if I add Lumiverse 1 and coresponding fixture 170px add to Lumiverse 1,height 1,first meter of the strip lights properly,but if i need to "activate" second strip on channel two of the controler,nothing hapens,but if i conect 1m of led strip to strip conected on a first channel(so first channel have 2m led strip conected),it light up properly,but as I said,nothing on the channel 2 of the controler.
So,when I setup first Lumiverse 1 on the first channel of the controler,then creating Lumiverse , how I can "tell" the controler that signal should not go to the first channel,but the second,because he adds pixels to the first channel,not the second,as i want it?
Big thanks,Goran.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Resolume Arena mapping led strip WS2812 problem,plaese help

Post by Zoltán »

If you changed the target universe and subnet in the Advanced Screen setup on the Lumiverse,
https://resolume.com/support/en/dmx#usi ... lumiverses

then check your pixel controller's manual on how to set that universe to be the input for your pixels.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply