Triplehead2go projectors no signal

Bro, does your rig even lift?
Post Reply
Gmag20
Met Resolume in a bar the other day
Posts: 1
Joined: Wed Jun 07, 2023 00:38

Triplehead2go projectors no signal

Post by Gmag20 »

Hi,

I have a Lenovo with Ryzen 5.
One triplehead2go
3 x Optoma eh415st projectors.

Laptop has 1 hdmi output which is connected to the triplehead2go through an adaptor display port.

Gxm is able to communicate with the projectors as the make and model is detected.

Issue is all 3 show “no signal detected “

I’m at a complete loss and would take any help I can.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Triplehead2go projectors no signal

Post by Zoltán »

Are you sending a supported format to the projectors?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
He2neg
Wants to marry Resolume, and Resolume said "yes!"
Posts: 938
Joined: Fri Nov 22, 2013 21:34
Location: Berlin, Germany

Re: Triplehead2go projectors no signal

Post by He2neg »

maybe a hdcp issue... you can try to switch this off inside the gfx settings...
Laptop: XMG P507 // Intel i7-5500 / GTX-1060 / 1tb SSD / 32gb RAM // Lemur / BirdDog Studio NDI
~self employed AV technician / Schu.VT|a|posteo.de~
~Berlin~

User avatar
cosmowe
Knows Resolume better than the devs
Posts: 1597
Joined: Fri Mar 25, 2011 10:27
Location: cologne // germany

Re: Triplehead2go projectors no signal

Post by cosmowe »

Hi Gmag20,
you wrote that you are using an Hdmi to Displayport adapter/adapter cable.

This signal direction (HDMI>DP) will only work if you are using an "active" Adapter.

May you share the adapter model you are trying to use?


Best wishes
cosmowe
Image Do you like outlines? Easy Outliner on Juicebar

Post Reply