Resolume Forum

I was able to get this resolved last night. I was able to replicate a full shut down and start-up 8 times in a row with zero issues.

Frédéric, unplugging downstream and keeping the Gefen Detective Plus Units did the trick.

I now power on the PC with all units plugged in.
Open Resolume and verify that everything is displaying correctly.
Unplug from the TV's to the Gefen Units.
I can then keep everything else running, power on my TV's, plug them back in to the Gefen's and I'm immediately back up. This is a mobile setup that I have less than 60 seconds to get setup!

Thank you all so much for all the comments and suggestions!

Here's a pic of my setup if anyone is interested:
http://imgur.com/IWrBfdw

I'm glad it worked for you!

After looking at your picture, now I'm curious of what this setup is for.

Oaktown wrote:I'm glad it worked for you!

After looking at your picture, now I'm curious of what this setup is for.

This setup was used for Matrix Performing Arts.
I design for and teach a non-profit percussion ensemble made up of kids between the ages of 17-22.
Here's an example of our show from 2013. It placed 4th at our World Championships.
https://www.youtube.com/watch?v=E8dvgzjRrkM

Many of these independent and high school groups are using video now.
Unfortunately I started to have detection issues again this past week and we basically pulled the TV's out before our final three performances. We may try again next season. It was definitely a learning experience!

Thanks again for your help