Resolume Forum

matrox mxo mini seems not to work YET!
also the Blackmagic Intensity USB 3.0 version would do the job, but also there are problems with the drivers as far as i know!

i think you need some very specific chipsets to work properly with the intesnsity usb ( i think it requires an x57 based motherboard, but its late so my brain might be playing tricks on me )

VJair wrote:

Tschoepler wrote:"Matrox mxo2 mini

i thought they didnt work with avenue?

even with syphon?

We actually have a MXo2 mini on loan from Matrox at the moment. Works as expected. Also check it out in action in the video here:

any word on the Matrox MXO2 working on a windows machine?

I read somewhere the windows machine does not like Avenue, and MXO2

Indeed, the MXo2 mini does not seem to like Avenue on Windows (because the Avenue video capture works differently on Windows). We are aware of this, and are working on it.

what about the Matrox MXO2 LE, probably the same issue, but you never know, thought i would ask...?

We haven't tested one of those, so I couldn't say for sure, but I'm assuming it will have the same issue.

I take it no one has got the MX02 Mini to work with Resolume on Windows?

This is something I would like to do for an event in a few weeks and so far in testing, Resolume sees the MX02 as a source but does not display anything.
There is no way to change the input settings for the MX02 in Resolume so I assume that it is based on the config in the programs supplied with the MX02 driver files?

Thanks,

Tim

goto10 wrote:Indeed, the MXo2 mini does not seem to like Avenue on Windows (because the Avenue video capture works differently on Windows). We are aware of this, and are working on it.

I have managed to get this to work - see my post in the hardware section. http://www.resolume.com/forum/viewtopic.php?f=7&t=8715

Tim