Page 1 of 1
Resolume 4 - Hercules RMX Jog Wheels
Posted: Sun Jan 20, 2013 17:54
by PixShake
Hi all,
Hercules RMX midi control works nice with Resolume.
But jog wheels do not work for scratching. Midi mapping is done but it just re starts the video.
I search in the forum, google, ... but couldn't find any answers.
Any idea ?
Thx
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Tue Jan 22, 2013 14:32
by Joris
Can you find out what sort of midi signal is sent by the Hercules (absolute CCs, relative CCs etc)?
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 13:07
by PixShake
Thx for quick reply, goto10.
Which soft can I use to find out the kind of midi signal?
Win 7 x64.
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 14:35
by HerrNieDa
i also miss the function next/previeous frame from resolume2
with this it was possible to scratch with my contour shuttle express controller!
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 14:41
by Joris
Could you at least help the OP with his question before hi-jacking his thread?

Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 16:55
by thedawjones
You simply need to change the controller settings in Resolume.
1.Go into mapping mode.
2.Map jog wheel to play head
3.In the bottom left corner you should see a box with midi output options. Change the "Mode" to Relative (0-127)
check the "loop" box and that is it.
This did the trick on my Herc DJ Control, so it should work for you.
You can fine tune it with the "steps" & "stepsize" options in the same menu or use the Hercules control app to adjust sensitivity.
Bomes/ Midi-Ox are not necessary, contrary to popular belief.
Let me know how it works. Good luck.
The DAW Jones
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 17:25
by Joris
Now that's how you make a first post on a forum!
Welcome!
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Thu Jan 24, 2013 19:54
by thedawjones
Thank you, Sir.
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Fri Jan 25, 2013 23:12
by PixShake
thedawjones wrote:You simply need to change the controller settings in Resolume.
1.Go into mapping mode.
2.Map jog wheel to play head
3.In the bottom left corner you should see a box with midi output options. Change the "Mode" to Relative (0-127)
check the "loop" box and that is it.
This did the trick on my Herc DJ Control, so it should work for you.
You can fine tune it with the "steps" & "stepsize" options in the same menu or use the Hercules control app to adjust sensitivity.
Bomes/ Midi-Ox are not necessary, contrary to popular belief.
Let me know how it works. Good luck.
The DAW Jones
Just what I needed !
I use value "100" for steps parameter and it works like a charm
Thank you.
Re: Resolume 4 - Hercules RMX Jog Wheels
Posted: Sat Jan 26, 2013 01:16
by thedawjones
Awesome! Congrats!
The DAW Jones