Page 1 of 1

Full Dome VJ´ng

Posted: Wed Mar 27, 2013 16:57
by pfelberg
Ok...now what..
I wish to know the proper setup and how to use Arena to accomplish this. ; )
I´ve seen some old setups using mirrors but doesn´t seem the way it goes here:

https://www.youtube.com/watch?feature=p ... l3b5PBl87o#!

Re: Full Dome VJ´ng

Posted: Wed Mar 27, 2013 21:41
by vj granda
The software used in the video is Blendy Dome, but it's under developement...
http://www.blendy.in/

I'm not sure if you can acomplish this only with Arena, but I'm pretty sure that with the help of Visution-mapio it's possible.

Re: Full Dome VJ´ng

Posted: Thu Mar 28, 2013 14:26
by deepvisual
you dont have many choices.
its going to be security mirror or
use a planetarium media server
or spend a very long time doing the line up in whatever app you chose.
but the blends and joins you will find next to impossible.

otherwise just have 3 or 4 of the same image
you can mask the lenses with masking tape.

Re: Full Dome VJ´ng

Posted: Thu Mar 28, 2013 18:07
by Stickygreen
I've tried using Arena to accomplish a full dome install. it doesn't work. the edge blending is the problem, Arena cannot handle the compound curves, and multiple overlaps that a 4 projector install in a dome environment requires.

I think that IRmapio has plans of implementing this in the future, as with the latest release there is a default quad radial preset, but still the edge blending can't handle the compound curved surfaces.

I think the biggest issue is VJ software developers access to a proper full dome theater.