Blackmagic Design DeckLink Duo 2

Bro, does your rig even lift?
Post Reply
Serg
Met Resolume in a bar the other day
Posts: 13
Joined: Mon Feb 10, 2014 08:15

Blackmagic Design DeckLink Duo 2

Post by Serg »

Anybody use this with Resolume? Is it really can support 4 inputs 1080p60?

Meptik
Hasn't felt like this about software in a long time
Posts: 67
Joined: Sun Jul 10, 2016 00:12

Re: Blackmagic Design DeckLink Duo 2

Post by Meptik »

Correct. All of our systems have these cards and can do this. Either 4 inputs or 4 outputs at 60P.

User avatar
Oaktown
Resolume honorary member
Posts: 2837
Joined: Tue May 08, 2012 15:19
Location: Oakland, CA

Re: Blackmagic Design DeckLink Duo 2

Post by Oaktown »

Yes we use that as well and it works great!

Keep in mind that you'll have to set it up to work that way and it's not straight forward but if you search the forum you'll find some threads on the topic.

cormacokane
Met Resolume in a bar the other day
Posts: 7
Joined: Thu Jul 27, 2017 19:04

Re: Blackmagic Design DeckLink Duo 2

Post by cormacokane »

Hi . I'm trying to get my decklink duo working with resolume and I can get only one output to work at a time and also only when I select pal or ntsc as the output format.
Is this correct?
Any tips on correct settings on outputs to use decklink successfully with resolume would be much appreciated.
Thanks
Cormac
P. s. I am aware of the correct connector settings on the decklink card for the sdi outputs .

Zoltán
Team Resolume
Posts: 7075
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Blackmagic Design DeckLink Duo 2

Post by Zoltán »

How do your settings look like now?
Could you please send us the Resolume log file via the feedback tab in preferences?
Thanks!
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

User avatar
Arvol
Might as well join the team
Posts: 2768
Joined: Thu Jun 18, 2015 17:36
Location: Oklahoma, USA

Re: Blackmagic Design DeckLink Duo 2

Post by Arvol »

BMD cards are a pain but they work. Last time I used one I spent 3 hours trying out various drivers until I found one that worked (This was in 2020). Once they're up and running they should be pretty stable. It's a LOT of work in their software to configure and minimal work in Resolume. The outputs will not be sync'd FYI.

Post Reply