Page 1 of 1
Blackmagic Design DeckLink Duo 2
Posted: Wed Apr 19, 2017 03:25
by Serg
Anybody use this with Resolume? Is it really can support 4 inputs 1080p60?
Re: Blackmagic Design DeckLink Duo 2
Posted: Wed Apr 19, 2017 04:11
by Meptik
Correct. All of our systems have these cards and can do this. Either 4 inputs or 4 outputs at 60P.
Re: Blackmagic Design DeckLink Duo 2
Posted: Wed Apr 19, 2017 05:08
by Oaktown
Yes we use that as well and it works great!
Keep in mind that you'll have to set it up to work that way and it's not straight forward but if you search the forum you'll find some threads on the topic.
Re: Blackmagic Design DeckLink Duo 2
Posted: Fri Jul 15, 2022 12:15
by cormacokane
Hi . I'm trying to get my decklink duo working with resolume and I can get only one output to work at a time and also only when I select pal or ntsc as the output format.
Is this correct?
Any tips on correct settings on outputs to use decklink successfully with resolume would be much appreciated.
Thanks
Cormac
P. s. I am aware of the correct connector settings on the decklink card for the sdi outputs .
Re: Blackmagic Design DeckLink Duo 2
Posted: Wed Jul 20, 2022 15:54
by Zoltán
How do your settings look like now?
Could you please send us the Resolume log file via the feedback tab in preferences?
Thanks!
Re: Blackmagic Design DeckLink Duo 2
Posted: Wed Jul 20, 2022 16:23
by Arvol
BMD cards are a pain but they work. Last time I used one I spent 3 hours trying out various drivers until I found one that worked (This was in 2020). Once they're up and running they should be pretty stable. It's a LOT of work in their software to configure and minimal work in Resolume. The outputs will not be sync'd FYI.