Resolume Forum

hi
we use 2 video projector for mapping on designed surface, we setup video projector add videos in resolume and create screens, slices, polygon whatever.... for masking videos.we saved composition and its okay videos played correctly til laptop restarted or turned off. the whole process is change and gone. resolume just define one of the video projectors the other one just shown windows background.

On startup, Resolume will try to load the previously used output setup. If that doesn't match with how it was before, it means that something has changed in how your displays are connected.

Make sure all your outputs are powered before you turn turn your computer on.

Make sure you turn your computer off before you power off your outputs.

Also, if you are going to plug/unplug your outputs, make sure you label everything so that you can plug back in the same ports everytime.

It is a good idea to add an EDID device to all output interfaces, which allows the system to have a display device connected, even if it is not or not powered up. Firepro and Quadro itself have this feature。