2 projectors - 60 miniclips - 5fps?
Posted: Sat Sep 01, 2018 10:14
Hello,
I´m doing a project that use 2 optma projectors (resolution: 1280 - 800) and i´m using videos - mapping in the walls.
So basicly i have 30 little videos with 213px each one per projector.
I created 60 layers and i´m using one video per square mapping in each layer. the video size is around 4mb.
When i push all videos at the same time to create the full wall, the resolume start reduce the fps. It´s normal? In the last update resolume said that is already posible play 60 videos at the same time.
Another point is that i´m using two 20m hdmi cable, and my question is if an hdmi cable can break down a system? So, when i connect the both projectors to hdmi mac port and one to thunderboolt, the system starts begining very very very slow. For example, resolume goes to 4fps with a free composition and a free mapping. I was thinking and can only be because the cable, or no?
Thank you!
I´m doing a project that use 2 optma projectors (resolution: 1280 - 800) and i´m using videos - mapping in the walls.
So basicly i have 30 little videos with 213px each one per projector.
I created 60 layers and i´m using one video per square mapping in each layer. the video size is around 4mb.
When i push all videos at the same time to create the full wall, the resolume start reduce the fps. It´s normal? In the last update resolume said that is already posible play 60 videos at the same time.
Another point is that i´m using two 20m hdmi cable, and my question is if an hdmi cable can break down a system? So, when i connect the both projectors to hdmi mac port and one to thunderboolt, the system starts begining very very very slow. For example, resolume goes to 4fps with a free composition and a free mapping. I was thinking and can only be because the cable, or no?
Thank you!