Resolume Forum

Somebody knows if you can have a 1440x576 output display with a matrox parhelia (Triple head) and resolume or two diferents output displays of 720x576 simultaneously?

thanks

Yes you can,
The best thing is two create two output screens. And set both of the screens to show a specific layer. So no streched windod with a resolution of 1440x576.
So go to screen setup, there you will see three displays. One is set to interface, enable the other two and set process and output resolution to 720x576.
Then go to advanced and choose wich layer combination you want to show on each of the screens. Set to fullscreen for best performance, sometimes this fails then try windowed.

Cheers
Edwin

ok thanks for your answer and sorry for the delay...but I was having problems buffff
For the moment and with this graphic card matrox Parphelia APVe triple head (PCIe) and with the three outputs enabled, resolume only recognizes only 1 output, thats because it makes a desktop of 3840x 1024. Another option that matrox gives is two independent resolution monitors and the third is a characteristics monitor (DVDMax) but resolume only recognizes 2 outputs.

I can't find the way to have 3 independent monitors. Are you using the same graphic card? How do you do it?

Thanx again!

You must enable standard windows multimonitoring, not the driver function

and how can I do this??? Because i disable the drivers of the graphic card and windows only show to me one monitor....

That ou must ask someone who has that card

Check this link...

Greetz,
SuperficiaL