ENTTEC OCTO
Posted: Sat May 02, 2020 15:42
Does the ENTTEC OCTO work with Resolume 6?
I know there are issues with the ENTTEC DMX USB Pro talking to Resolume.
I am trying to output to LED Pixel Tape.
The OCTO appears to be working fine in ENTTEC Stand Alone mode.
In my Advanced Output in Resolume the IP address is the same as the OCTO.
Also does not work if my IP is one digit off.
Thank you
I know there are issues with the ENTTEC DMX USB Pro talking to Resolume.
I am trying to output to LED Pixel Tape.
The OCTO appears to be working fine in ENTTEC Stand Alone mode.
In my Advanced Output in Resolume the IP address is the same as the OCTO.
Also does not work if my IP is one digit off.
Thank you