Page 1 of 1
Artnet + 25 200leds, 150universes
Posted: Mon Sep 21, 2020 08:35
by Zdenek123
Hi, have you got any tips how solve this? My plan is artnet, but I dont know if is posible send 150 universes thru cat5e cable? And what you thing about hardware requirements of the pc? Is that possible? Or do you have easyer way how to do it? Thanks
Re: Artnet + 25 200leds, 150universes
Posted: Mon Sep 21, 2020 23:59
by Arvol
I believe Resolume is using Artnet -III (can't confirm, @Zoltan, did I guess right on this one?
)
Artnet-III can support almost 33,000. The question is can your system handle it? What CPU are you running and how much system memory do you have? That is a lot of encoding/decoding
Re: Artnet + 25 200leds, 150universes
Posted: Tue Sep 22, 2020 07:52
by Zdenek123
So you think here could be problem with mount of data into cat5e cable its just too much? And computer we will probabely buy one, I have no idea what hardware requirements is needed that is reason why I am asking, if you think its too much I could try find another way how to do it...any idea?
Re: Artnet + 25 200leds, 150universes
Posted: Tue Sep 22, 2020 08:53
by Zoltán
You can address 16 Unvierses : 16 Subnets (256 universes) in Resolume per destination IP address. I believe that's Art-net II
There is a software limitation of 1024 Lumiverses in the Advanced output.
Data for a universe is not much, about 200kB/sec at 40FPS, but indeed hard to say what your machine will be able to handle, as the values for the pixels need to be evaluated.
Re: Artnet + 25 200leds, 150universes
Posted: Tue Sep 22, 2020 11:37
by Zdenek123
Thanks for reply. So when I have 150 universes x 200kB/sec = 0,03GB/sec, so this shouldnt be problem. Today I am using laptop i7-7500U 2.7GHz / 8GB / 256GB SSD / AMD R7 M445 4GB / Win10, its 2 years old what you think is good enaught to handle with it?
Re: Artnet + 25 200leds, 150universes
Posted: Tue Sep 22, 2020 15:23
by Arvol
Zoltán wrote: Tue Sep 22, 2020 08:53
You can address 16 Unvierses : 16 Subnets (256 universes) in Resolume per destination IP address. I believe that's Art-net II
There is a software limitation of 1024 Lumiverses in the Advanced output.
Data for a universe is not much, about 200kB/sec at 40FPS, but indeed hard to say what your machine will be able to handle, as the values for the pixels need to be evaluated.
I LOVE this reply. So much info packed in here.
Any chance you could add this information into the "nerds" section of the dmx support page? I know my lampy friends would find this VERY useful
