Disconnecting one projector from two

Bro, does your rig even lift?
Post Reply
jacekmi
Met Resolume in a bar the other day
Posts: 3
Joined: Mon Jul 20, 2020 11:50

Disconnecting one projector from two

Post by jacekmi »

I use resolume Arena to run shows from my laptop with two projectors. Projectors are connected to a laptop via DVI sockets. I am having trouble disconnecting one projector. Always on the same socket. At the beginning of the show, the projector is disconnected several times in a row. Then, when I play the show, the projector is disconnected, the disconnection occurs at approximately equal intervals. First there is one disconnection, then another after a certain period of time, and the cycle repeats itself. Recently, I replaced the cables with new ones. What could be causing this?

Zoltán
Team Resolume
Posts: 7075
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Disconnecting one projector from two

Post by Zoltán »

Could also be a faulty connector.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

jacekmi
Met Resolume in a bar the other day
Posts: 3
Joined: Mon Jul 20, 2020 11:50

Re: Disconnecting one projector from two

Post by jacekmi »

The connector was soldered but it didn't change anything, same problem all the time.

Zoltán
Team Resolume
Posts: 7075
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Disconnecting one projector from two

Post by Zoltán »

What kind of laptop are you using which has DVI sockets?
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply