Transition delay between clips

Post your questions here and we'll all try to help.
Post Reply
lwhitney
Met Resolume in a bar the other day
Posts: 2
Joined: Wed Jul 20, 2022 19:28

Transition delay between clips

Post by lwhitney »

New to resolume. Running Arena 7 on a 2019 Mac Pro tower with 3 4K outputs. Software is controlled via grandMA2. On the console, if I set the transition time at X seconds and then trigger a clip, it takes X seconds to start the transition and then another X seconds to actually transition, which is not ideal in the least.

Example:

Layer transition time set at 4 seconds. Trigger new clip and a green “load bar” type thing shows up on the thumbnail for 4 seconds, THEN the 4 second transition starts. I have no idea what’s going on so any help is appreciated.

Zoltán
Team Resolume
Posts: 7088
Joined: Thu Jan 09, 2014 13:08
Location: Székesfehérvár, Hungary

Re: Transition delay between clips

Post by Zoltán »

Your clips are set to BPM sync, the bar shows the beat grid position till the trigger.
try setting them to Timeline: https://resolume.com/support/en/video#playback
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu

Post Reply