Hello
I am working in Resolume 7.13.2.17774 (the latest version)
System is a AMD Ryzen 9 5950X 16-Core Processor 3.40 GHz and an RTX3080.
My project is 25fps, my media is DXV 3 normal quality with alpha.
I am working in a demo version on my studio PC not a licensed version (which is on the show machine) but assume this should not present a problem
I am trying to build a very simple resolume project where a clip is triggered and then I use an auto follow action to play another clip which then loops infinitely. Lets call these clip 1 and clip 2.
Initially this worked fine, however I made a change to the retriggering behaviour because I did not want the clip 1 to start again if it was triggered again before it had finished playing. I changed the play behaviour to "continue" rather than "restart" in transport controls.
At this point Clip 2 does play after clip 1, however when I retrigger clip 1 (which is 15 seconds long) it has stopped playing at 14:24, rather than the end of the clip and does not retrigger.
I have tried two possible solutions to solve this problem and neither have worked.
Solution 1 : have the clip set to loop and then in autopilot set the number of loops to 1.
Solution 2 : have the clip set to play one and clear
Both exhibit the same behiviour. I think the software is not behaving as it should but perhps I am missing some global setting somewhere I need to sort in order to get it working.
Advice welcome
Cheers!