Page 1 of 1
resolume controlled by ENTTEC DMX PRO
Posted: Tue Jun 22, 2010 09:16
by sompompir
Hi!
I've got the version of resolume called resolume avenue 3.1.3, and was wandering if it can be controled by DMX. On resolume site I found they recomend some ENTTEC DMX PRO device, but I can't find
any manuals to see how it should be done and how it works.
I would appreciate any information about that...
ty
Re: resolume controlled by ENTTEC DMX PRO
Posted: Tue Jun 22, 2010 10:44
by levon
Resolume Avenue does not have DMX integration, Version 2 you could use DMX to control it, and also control DMX from flash, but that function has not been ported over to Avenue.
Re: resolume controlled by ENTTEC DMX PRO
Posted: Tue Jun 22, 2010 19:02
by sompompir
any recomended hardver for that? does it work with ENTTEC?
Re: resolume controlled by ENTTEC DMX PRO
Posted: Tue Jan 11, 2011 01:56
by jjames
Support has been added for Enttec DMX Pro. But I have trouble with it on some computers.
Re: resolume controlled by ENTTEC DMX PRO
Posted: Tue Jan 11, 2011 08:53
by dbassix
We're using the ENTTEC DMX USB Pro in our Mediaservers and have no trouble with this so far. We just did our own mapping for resolume and build a fixture for our lightning software.
Take a look here:
viewtopic.php?f=8&t=7684
Re: resolume controlled by ENTTEC DMX PRO
Posted: Wed Jan 12, 2011 13:02
by jjames
Great photos!
I tracked down my Com port conflict problems. I am now working on the mapping and fixture editing.
Seeing your post has made me realise that one way of overcoming the multiple screen and projector problem is to just run Resolume on more than one machine. It is easier (and cheaper) than trying to get six HD outputs to run smoothly out of the one computer.
Thanks.