Resolume Forum

and another one. it has two modes: step–sequence and random.

Hi, just tested your program...

I't doesn't seem to work in "sequence mode" either the "fade time".

maybe I just don't know how to work with it, I need the user manual.

thanks for the great work...

SEQUENCE–MODE
1. set length of pattern to e.g. 8
2. change the zeros to either 1(crossfade to B) or -1(crossfade to A)
3. set fade time to 250(ms)
4. toggle on/off
5. beat int is set to 1 by default (although 0 is shown). if for example you raise beatint to 4 then it takes 4 times as long for the sequencer to progress. in this case one step of the sequencer = 4 beats. I implemented this in case 16 steps is not enough.

RANDOM–MODE
1. toggle on/off
2. that's all.

cool looking forward to testing this when new lappy is on the way!!!

Many thanks for your work, Tschoepler, I find the auto-crossfader extremely useful.

A couple of minor suggestions / requests for future development..

1. Might it be possible add a midi clock input, similer to the one used in zuvassin's version of the step sequencer?:
http://www.resolume.com/forum/viewtopic ... cer#p28032
I'd love to be able to send Traktor's midi clock to this patch.

2. It would be useful to have a button which jumps the seqencer pattern back to the first square. You may have, let's say, a 16 beat pattern which is perfectly in time with the beat but starts on the second beat of the bar.. it would be good to be able to jump it back so it starts on the first beat of the bar.

Regards
charlastro