Resolume Forum

I cant get this to work. The cards show in sources, but input are black even though a camera is attached with the hdmi inputs...
Have any of you intensity users done anything speciel to get it to work in resolume?

setup:

windows 7, 64 bit
2 blackmagic intensity pro's with 2 cameras attached
resolume 3.3.1 DEMO

Yeah it sure does. Got Intensity Cards and Shuttle working.
You missed this.
viewtopic.php?f=7&t=7393#p27762

1st:
If your HDMI output is HDCP compatible it wont work. Black Magic is not HDCP recognized.(Probably irrelevant to cameras)

2nd:
Your Intensity capture must be set exactly to match your output device. (Example: output device=1080/30p input =1080/30p). Some devices output 1080/60p or 1080/60i and not configurable. Intensity has many available presets but often not compatible ,no 1080/60p.

Tanks a lot!

I think it a resolution match-issue then.

My camera outputs is descriped as 1920/1080i on the camera display, and as 1080i/50Hz if i hook to my tv.

By the way, It works with the blackmagic software thats come with the card.

If you can see it in BlackMagic Express then probably you have not configured it properly in Resolume.

In Resolume, Right click the video source and make your matching resolution selection.

Two questions with this..

1.Anybody using this Blackmagic to capture one PC output (DVI to HDMI)... ?

2.Whats the approx frame delay once its into resolume?

frame delay is very little, but that depends on resolution, and computer specs. If I'm capturing full HD i can get about 1 or 2 frames delay, hardly noticeable. If I'm capturing less resolution, then it's near impossible to tell if there is any delay at all. I think this will vary depending on your CPU, and RAM of your capturing machine though..

Who has experience with the Intensity USB3 MacBookPro beta driver, and it's latency/delay in Resolume with a SD signal input? (HD conversion to SD-SDI output from the ATEM1, going into the Intensity composite input > USB3)

would be great to know
Thnx
R

All options, old new MacBooks did NOT work for me.
Might be that the Intensity box is broken?! I dont have a clue.

R