Page 1 of 1
Resolume + M-Audio Fast Track Pro Problem
Posted: Thu Jul 21, 2011 14:13
by Scott
I am trying to get Resolume working on a laptop that is running Ableton and is connected to a fast track pro audio interface. I can't figure out how to drive the external FFT using my audio output. None of the default inputs seem to give me a reasonable audio level. If I turn the gain in Resolume up all the way, I can get a tiny tiny bit from the stereo mix.
Are there any solutions to this problem?
Re: Resolume + M-Audio Fast Track Pro Problem
Posted: Mon Jul 25, 2011 00:33
by Scott
Bump, are there any support people on here?
Re: Resolume + M-Audio Fast Track Pro Problem
Posted: Tue Jul 26, 2011 16:17
by Joris
Hey Scott
Are you talking about R2.41 or Avenue?
Joris
Re: Resolume + M-Audio Fast Track Pro Problem
Posted: Wed Jul 27, 2011 04:16
by Scott
Sorry, I meant Avenue I guess. Can this be moved?
Re: Resolume + M-Audio Fast Track Pro Problem
Posted: Wed Jul 27, 2011 15:47
by Joris
Okay, that helps. By default you can't route the audio output of your computer into Avenue on the same computer. Only external sources like microphone, line-in or similar devices are recognized. You may be able to workaround this by using an application like SoundFlower to route the audio internally.
Hope that helps.
(topic moved)