Resolume Forum

I have to do the following and i am wondering if it would be possible to do from one PC...

See attached image for Reference, the PC that i have set aside for doing that is a iCore 7, with a GTX 560, 8GB RAM and a SSD with 120GB.

What i am wondering is if i can have separate control over each screen double, like the LED screens and the side screens inside, but also run them together for patterns.

Then run the outside screen separate as well.... Or should i go ahead and run the outside on a other PC, I would like to do it on the same so i have better quick access to it.

I have Arena 4 installed... i will buy 3 lics.

What i am looking is some advice on how to set this up. If i should buy some triplehead or dualheads from matox and so on.

This is the main feature that the Advanced Output options in Arena are designed for, so you can designate which part of your output goes to which screen.

If all outputs are connected independently, you would need 5 outputs to make this work, but this really depends on how the led screens are connected.

What i am wondering is if i can have separate control over each screen double, like the LED screens and the side screens inside, but also run them together for patterns.

If I understand u right....

Video 1&2 - Same content
LED 1&2 - Same content
Video 3&4 - Same content

...running on one PC with the possibility to shot clips separate to the screensduos or as groups to all
right? What manufacture is the LED wall?

Here is one possible solution:




Have fun!

Sooooo.....did everything worked fine?