Page 1 of 1
DMX via ArtNet
Posted: Tue Feb 28, 2012 14:36
by simonsen@hnt.dk
Hi
I have purchased Arena, and I am quite happy with it, however,there seem to be a bug, when controlling it with DMX via Artnet. It is no problem to get it running, but when creating a costum mapping, and saving the session, it does not remenber the DMX mapping, when reopening the show!
What to do?
Win 7 pro / arena 4.01
Re: DMX via ArtNet
Posted: Tue Feb 28, 2012 15:35
by cosmowe
Does Resolume loses the whole mapping ...or only some DMX mappings?
I ask because I had equal troubles with it some time ago....but in my case only the master opas dmx map was lost.
Greetz
cosmowe
Re: DMX via ArtNet
Posted: Tue Feb 28, 2012 16:29
by simonsen@hnt.dk
I think You are right, only the masters loose the mapping...!
Re: DMX via ArtNet
Posted: Tue Feb 28, 2012 16:35
by cosmowe
Here the link to my old topic:
viewtopic.php?f=12&t=8781&p=32578&hilit ... ter#p32578
Hmmm... they thought they fixed it.
Greetz
cosmowe
Re: DMX via ArtNet
Posted: Tue Feb 28, 2012 16:50
by simonsen@hnt.dk
And that was even a Avenue, and not Arena...
Resolume, can You fix it again?
Re: DMX via ArtNet
Posted: Tue Feb 28, 2012 17:44
by Joris
I'm sorry, but I just tried the following:
1. Start with the demo composition
2. Turn on ArtNet in the DMX tab of the preferences
3. Enable AutoMap.
4. Checked to see that Channel 1 was being received.
5. Disabled AutoMap.
6. Mapped Channel 1 to Master opacity
7. Checked to see if it worked.
8. Saved the composition.
9. Restart Resolume.
At this point, Channel 1 is still controlling the Master opacity like it was before the restart. If you follow these steps, are you experiencing differently?