Resolume Forum

I didn't do the math on panel count, but I'm going to re recommend an LED wall. A tv display wall bandaged together out of a bunch of cheap tvs is going to be a nightmare. If you can't find someone to build it for you for something in budget then build it yourself!

http://www.led-card.com/p3-91 ...

Update-
Layer transport speed does slow down autopilot.
BPM Speed works great, but I will have to be bypassed for the video clips.

So I have a stack of 50 world flags. All formerly png, but converted to single frame dxv 3, as recommended. Single frame plays back a little too quick to enjoy each flag so I have adjusted clip transport on each clip to .01 speed, but once I turn on autopilot to play through them, it defaults to 1.0 ...

I have also had this problem, where output disable wouldn't work. It seems that window focus is the culprit, meaning that if you push cntrl shift d but the advanced output window is in focus (on top of the main UI windows, though hidden by the output render) nothing happens because the advanced ...

In crossfire, the outputs on the second card are disabled, so all outputs need to be on the first card.
I'd suggesting getting the best single gpu and triplehead or datapath x4 to get the number of outs you need.

Max outputs depends on the rest of your hardware as well, but as a general guide get ...

Blackmagic Analog to SDI adaptor perhaps?
Cheaper than rewiring a venue, and would allow the analog mixers to get to the projector (assuming it has an sdi input).

Thanks for your answer, your software seems promising, but I want to trigger next clip and not a column. I don't get why there is no such OSC mapping? Playing the right next clip of the active one on the active layer. Since the keyboard mapping exists, what would prevent it to exist in OSC mapping ...

Under the composition menu (2nd set of menus, top left corner)-save or save as

if you would get to a setup where you need to accept Artnet from two different IP-s (Controllers) then you have to set a DMX merging rule in the receiving fixture/device.
so if you would want to control a movinghead from a lighting desk over Artnet, then you would want to control the color channels ...

+1 for png, though I'd hope that wouldn't be too hard. would make the led system tech's life much easier