Resolume Forum

Unfortunately Resolume only supports Net 0, so I'm limited to 256 universes.


You can unicast a universe 1 to device A, and another universe 1 containing other data to device B.


If you have 5 pixel controllers on 5 IP addresses, you can send 5x256 unique Universes.


Yes thanks, that's ...

Hi!
Thanks for gettin' back.
The reason we dont support Net is quite simple, it didn't exist when we implemented a superset of ArtNet 2.
Ah, that makes sense. Didn't know that it is still running on ArtNet2.

Keep in mind that ArtNet unicasting doesn't require universe numbers to be unique. You ...

Hi!

I'm using Resolume in a location with a lot of Pixel strips. I currently facing the issue of running into the limitations of Resolume's ArtNet config. It is only possible to set the subnet and universe, but not the net.

Usually it's net(0-128)/subnet(0-15)/universe(0-15) according to ArtNet ...

Hi again!

I just wanted to keep everyone updated who was following this thread or maybe has the same problem and found this topic after searching for it.

After hours of research and try and error, I found out that the problem is the YCrCb signal a Mac is sending out by default. We had the exact ...

Hello Zoltan!

I took some time on the last weekend and prepared the advanced output so the point positions of the polygons in "point edit" are perfect pixels with no decimals. Please find the advanced output attached for your review.
I furthermore attached an image of the Resolume testcard. As you ...

Yes I know, but I can only cite myself in this case:

I understand that this could lead to problems.
The thing is that those values became these values all by themselves. When I type in a pixel perfect value and move for example the whole slice by exactly one pixel and I grab a corner of the slice ...

Hello Zoltan!

No, its Slice4-1, Slice 4-2, Slice 4-3 & Slice 4-4. So alle 4 slices that build the center led wall.

Kind regards,
Martin

Hello Zoltan!

I understand that this could lead to problems.
The thing is that those values became these values all by themselves. When I type in a pixel perfect value and move for example the whole slice by exactly one pixel and I grab a corner of the slice (with turned off snap function of course ...

Hi Zoltan!

Please find our advanced output attached.
Can you specify what you mean by HiDPI? We didn't tweak anything so far, so everything should run like a usual monitor we connect to our MacBooks. No scaling - the scaler/dvisplitter introduces itself as 1080p60 like it is supposed to.

Thanks ...

Hi!

I'm currently having a problem with a LED wall setup.

Let me first give you an overview:
Windows-PC with Resolume Arena - HDMI Cable - Video Scaler (which is actually just acting as a DVI splitter and HDMI-DVI converter) - DVI - Sending Cards - Receiving Cards - LED Wall

Scaler is set to ...