Mac to Mac

[HerrNieDa]

matrox mxo mini seems not to work YET!
also the Blackmagic Intensity USB 3.0 version would do the job, but also there are problems with the drivers as far as i know!

[VJair]

i think you need some very specific chipsets to work properly with the intesnsity usb ( i think it requires an x57 based motherboard, but its late so my brain might be playing tricks on me )

[Tschoepler]

"Matrox mxo2 mini

i thought they didnt work with avenue?

even with syphon?

[Joris]

We actually have a MXo2 mini on loan from Matrox at the moment. Works as expected. Also check it out in action in the video here:

[Stickygreen]

any word on the Matrox MXO2 working on a windows machine?

I read somewhere the windows machine does not like Avenue, and MXO2

[Joris]

Indeed, the MXo2 mini does not seem to like Avenue on Windows (because the Avenue video capture works differently on Windows). We are aware of this, and are working on it.

[Stickygreen]

what about the Matrox MXO2 LE, probably the same issue, but you never know, thought i would ask...?

[Joris]

We haven't tested one of those, so I couldn't say for sure, but I'm assuming it will have the same issue.

[Tecno`]

I take it no one has got the MX02 Mini to work with Resolume on Windows?

This is something I would like to do for an event in a few weeks and so far in testing, Resolume sees the MX02 as a source but does not display anything.
There is no way to change the input settings for the MX02 in Resolume so I assume that it is based on the config in the programs supplied with the MX02 driver files?

Thanks,

Tim

[Tecno`]

Indeed, the MXo2 mini does not seem to like Avenue on Windows (because the Avenue video capture works differently on Windows). We are aware of this, and are working on it.

I have managed to get this to work - see my post in the hardware section. http://www.resolume.com/forum/viewtopic.php?f=7&t=8715

Tim