Wishlist and Bugs

[movebandit]

Hello Resolume Team,
heres a short list of things i noticed in my work and could be some useful minor and major changes for optimizing the workflow:

-BUG:Duplicating a Lumiverse doesn´t name it "name"+Copy
-WISH:Artnet Span one fixture over more Universes automatically
-WISH:Select more than one Lumiverse to Set Framerate, Brightness, Output etc
-WISH: Bring the Deck list back (When using a lot of Decks the Name of the Deck is not readable)
-WISH: set cue points midi out (For Colour feedback on Controller, Cuepoint set or empty)
-WISH:Tagging for files and decks (Set Tags and search for them, like colour, Style whatever)
-WISH:Be able to Delete file behind persistent clips
-WISH: Composition Browser: Close all Deck-Tabs
-WISH: When loading a Deck from Composition Browser, keep Cursor on Place (When compiling new compositions from old ones, i always have to scroll down again after loading a Deck)
-WISH: Select more than one Deck for Removal (ctrl or shift)
-WISH: Define Crossfade time and Style for single clips, not only a master time for the layer
-WISH: Define a loop repeat number or time for Autopilot
-WISH:Set a midi velocity mapping standard (for active colour feedback)
-WISH: Transform Parameters shown in percent, better show in pixel

more to follow....

[Zoltán]

-BUG:Duplicating a Lumiverse doesn´t name it "name"+Copy

Duplicating a Lumiverse adds a number to the end of the Lumiverse name. This is the same as a screen or slice duplicate works.

WISH:Select more than one Lumiverse to Set Framerate, Brightness, Output etc

Already possible with command + click.

-WISH: Bring the Deck list back (When using a lot of Decks the Name of the Deck is not readable)

Are you looking for the Compositions panel?

-WISH: set cue points midi out (For Colour feedback on Controller, Cuepoint set or empty)

Works with my APC 40 mk2.

-WISH: When loading a Deck from Composition Browser, keep Cursor on Place (When compiling new compositions from old ones, i always have to scroll down again after loading a Deck)

This is actually a bug. We'll see what we can do. (#11331)

[movebandit]

-BUG:Duplicating a Lumiverse doesn´t name it "name"+Copy

Duplicating a Lumiverse adds a number to the end of the Lumiverse name. This is the same as a screen or slice duplicate works.

I was working with around 60 Lumiverses and they were named like C1.7.3 U54 S27a 3.4 (Controller1 Output7 Strip3 Universe 54 Stripnumber 27 Subnet 3 Universe 3)
When copying the lumiverse it doesn´t call it C1.7.3 U54 S27a 3.4 copy (which would be nice just to rename the parameters) but "Lumiverse 1"

WISH:Select more than one Lumiverse to Set Framerate, Brightness, Output etc

Already possible with command + click.

Would be fine to use CMD+A and SHIFT+click. Did you ever selected more than 30 Lumiverses by CMD + click... ?

-WISH: Bring the Deck list back (When using a lot of Decks the Name of the Deck is not readable)

Are you looking for the Compositions panel?

Nope. Under the Clip Panel, the actually loaded Decks are shown. When there are too much, the name is not readble. Solution in Res5 was a popup window with the actually loaded decks.

-WISH: set cue points midi out (For Colour feedback on Controller, Cuepoint set or empty)

Works with my APC 40 mk2.

Doesn´t work as it could. The Status Velocity is only On and Off, but it would be helpful to have a Status like "Set" and "Empty", to directly see if an Cuepoint was saved or is empty.

-WISH: When loading a Deck from Composition Browser, keep Cursor on Place (When compiling new compositions from old ones, i always have to scroll down again after loading a Deck)

This is actually a bug. We'll see what we can do. (#11331)

Nice!

Some new ones:
WISH: Implement the Fixtures in the saved Screensetup. When sending Screensetups as inputmaps for other VJs we always have to send the Fixtures additionaly. Wouldn´t it be easy to save them together with the Screensetup ?

WISH: Next Button ("N" ?) for selecting next Slice, Highlite Button ("H" ?) for switching selected Slice to White. Helpful, when working with a lot of Slices and Integrated in nearly every Light Console...

WISH: Switch Lumiverses from xx:Subnet xx:Universe to xxx:Universe (Some Controllers display only the decoded number of the Universe and not subnet /universe. Less Calculator use..

[movebandit]

Another One: WISH:Move Persistent Files in actual Deck. Works with copy and paste, but could be a function in the menu...

[drazkers]

-BUG:Duplicating a Lumiverse doesn´t name it "name"+Copy

Duplicating a Lumiverse adds a number to the end of the Lumiverse name. This is the same as a screen or slice duplicate works.

I was working with around 60 Lumiverses and they were named like C1.7.3 U54 S27a 3.4 (Controller1 Output7 Strip3 Universe 54 Stripnumber 27 Subnet 3 Universe 3)
When copying the lumiverse it doesn´t call it C1.7.3 U54 S27a 3.4 copy (which would be nice just to rename the parameters) but "Lumiverse 1"

WISH:Select more than one Lumiverse to Set Framerate, Brightness, Output etc

Already possible with command + click.

Would be fine to use CMD+A and SHIFT+click. Did you ever selected more than 30 Lumiverses by CMD + click... ?

-WISH: Bring the Deck list back (When using a lot of Decks the Name of the Deck is not readable)

Are you looking for the Compositions panel?

Nope. Under the Clip Panel, the actually loaded Decks are shown. When there are too much, the name is not readble. Solution in Res5 was a popup window with the actually loaded decks.

-WISH: set cue points midi out (For Colour feedback on Controller, Cuepoint set or empty)

Works with my APC 40 mk2.

Doesn´t work as it could. The Status Velocity is only On and Off, but it would be helpful to have a Status like "Set" and "Empty", to directly see if an Cuepoint was saved or is empty.

-WISH: When loading a Deck from Composition Browser, keep Cursor on Place (When compiling new compositions from old ones, i always have to scroll down again after loading a Deck)

This is actually a bug. We'll see what we can do. (#11331)

Nice!

Some new ones:
WISH: Implement the Fixtures in the saved Screensetup. When sending Screensetups as inputmaps for other VJs we always have to send the Fixtures additionaly. Wouldn´t it be easy to save them together with the Screensetup ?

WISH: Next Button ("N" ?) for selecting next Slice, Highlite Button ("H" ?) for switching selected Slice to White. Helpful, when working with a lot of Slices and Integrated in nearly every Light Console...

WISH: Switch Lumiverses from xx:Subnet xx:Universe to xxx:Universe (Some Controllers display only the decoded number of the Universe and not subnet /universe. Less Calculator use..

It really helps me out having fixtures as a separate file In a logical file structure. Id personally not be into this.