Using above 16 universes with EPIX Drives

[mwebb9413]

Hello all.

I am new to the resolume world. However, I am using it for a new upcoming project, and need to use well over 16 universes. However, I am having an issue here. The EPIX Drives do not allow for me to edit their subnets. They count universes 0-254. So, on resolume I need to send Subnet 1:Universe 0-7 to Universes 16-23 on the EPIX drives, but the drives are not recognizing it. Is there a way to fix this? Am I missing something? Or can Resolume only communicate with the EPIX Drives with 16 universes?

[Zoltán]

Resolume can send 256 universes to any single destination, and counts universes from Subnet 0: Universe 0. this is the first one.

Subnet 1 : Universe 0 is the 17th universe, Subnet 2: universe 0 is the 33rd universe, so once you mapped out 16 universes in subnet 0, you can increase the subnet, and start mapping 17-32 (S1:U 0-15)

[mwebb9413]

Resolume can send 256 universes to any single destination, and counts universes from Subnet 0: Universe 0. this is the first one.

Subnet 1 : Universe 0 is the 17th universe, Subnet 2: universe 0 is the 33rd universe, so once you mapped out 16 universes in subnet 0, you can increase the subnet, and start mapping 17-32 (S1:U 0-15)

I am aware of this on the Resolume side, but it seems that the EPIX Drives are not recognizing any artnet universe above the first 16. I know this is not on the EPIX side, because it works fine with other softwares that count artnet universes like the drive does (0-254). Do you know of how I can make them communicate with each other? I prefer resolume to all other softwares, and so I really need them to work together.

[Zoltán]

So, what output setting have you tried to send universe 17 from Resolume?

Have you tried to contact Chauvet about how to receive from Art-net devices that number universes differently?