How to use a compiled wire file in Resolume?
How to use a compiled wire file in Resolume?
Cant figure it out to use a compiled wire file. I did it by using the patch "NeonCircuits" compiled it and wroteit to one of my local drived. I can see that there is a file with the name "NeonCircuits.cwired" I compiled it non editable. But cant find any dialog to use it in Resolume...
Re: How to use a compiled wire file in Resolume?
Try dropping it onto the Resolume UI
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: How to use a compiled wire file in Resolume?
Did it but no sucess... Have attached a zipped mp4 file
- Attachments
-
- WireToResolume.zip
- (2.11 MiB) Downloaded 331 times
- Arvol
- Might as well join the team
- Posts: 2875
- Joined: Thu Jun 18, 2015 17:36
- Location: Oklahoma, USA
Re: How to use a compiled wire file in Resolume?
Now look in your FX or sources tab and it should be there. is the file you installed a fx or a source? (needs to be specified in Wire when being built)
Re: How to use a compiled wire file in Resolume?
It is set to source, but it doest work for me. Have Tried everything..
Re: How to use a compiled wire file in Resolume?
Could you send us the patch to mail@resolume.com and the Resolume log file using the feedback tab in preferences?
Thanks!
Thanks!
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: How to use a compiled wire file in Resolume?
If you're trying these, they should be listed in Sources panel. Scroll down a bit, they won't be in the Wire group.
Code: Select all
[2021-06-26T15:04:20.523+02:00] INFO: Register Wire Patch C:\Users\Public\Documents\Resolume Wire\Patches\Test.cwired
[2021-06-26T15:04:20.606+02:00] INFO: Wire patch is registered as Source Test ( Test )
[2021-06-26T15:04:20.608+02:00] INFO: Register Wire Patch C:\Users\Public\Documents\Resolume Wire\Patches\NeonCircuits.cwired
[2021-06-26T15:04:20.689+02:00] INFO: Wire patch is registered as Source NeonCircuits ( NeonCircuits )
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Re: How to use a compiled wire file in Resolume?
Thank You .. Jap I found it out.
Kind regards
taratoga
Kind regards
taratoga
Re: How to use a compiled wire file in Resolume?
Ok what I also found out is this behaviour:
If I define a path in the wire compile dialog it is not persistend.
For example:
The path of the Wire sources in Avenue is:
G:\eigene Dateien\Dokumente\Resolume Wire\Patches\TestMidi
This path I cannot influence...
The path of the Compile in Wire is:
C:\Users\Public\Documents\Resolume Wire\Patches
Because it is not persistend I have to change it each time before Compile.. ;-(
If I define a path in the wire compile dialog it is not persistend.
For example:
The path of the Wire sources in Avenue is:
G:\eigene Dateien\Dokumente\Resolume Wire\Patches\TestMidi
This path I cannot influence...
The path of the Compile in Wire is:
C:\Users\Public\Documents\Resolume Wire\Patches
Because it is not persistend I have to change it each time before Compile.. ;-(
Re: How to use a compiled wire file in Resolume?
Yes, Resolume loads patches from these two folders:
c:/Users/Your User/Documents/Resolume Wire/patches
This is the folder Wire saves patches to
and
c:/Users/Public/Documents/Resolume Wire/patches
This is where compiled patches go, and also where patches you drag to Resolume get installed to.
Keeping the path ensures, that Resolume can find your patch.
c:/Users/Your User/Documents/Resolume Wire/patches
This is the folder Wire saves patches to
and
c:/Users/Public/Documents/Resolume Wire/patches
This is where compiled patches go, and also where patches you drag to Resolume get installed to.
Keeping the path ensures, that Resolume can find your patch.
Software developer, Sound Engineer,
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu
Control Your show with ”Enter” - multiple Resolume servers at once - SMPTE/MTC column launch
try for free: http://programs.palffyzoltan.hu