Page 2 of 2
Posted: Thu Mar 17, 2005 01:12
by MtB
according to the user manual,
notes 24h, 26h, 28h, and 29h controls channel a input 1, 2, 3, and 4
notes 2bh, 2dh, 2fh and 30h controls channel b input 1, 2, 3, and 4
i dont have a keyboard/controler right now so I cant test but if they wrote, it suppose to be ok though
bw
Posted: Sun May 08, 2005 05:18
by Anonymous
Is it possible to use the bpm function of the V4 to control software via midi?
Posted: Sun May 08, 2005 22:40
by VJair
You can transmit data from the controllers,but i dont think it transmits midi clock data.
Posted: Tue May 10, 2005 02:38
by Anonymous
I sent a question to Edirol:
Does the V4 send midi information out about its status (ie: BPM)? I want to sync up software with the BPM function.
Thank-you
Answer: Greetings,
The BPM control knob will only send MIDI data when the unit is in PRESENTATION mode, with the V-Link function turned ON. Unfortunately, the unit will not actually BPM sync when in this mode. Thuis, the V-4 will BPM sync to MIDI IN data as a slave, but it will not MIDI OUT BPM data as a master.
Best Regards,
Edirol Corporation
Too bad, maybe in the future they will implement this little feature:(
dR
Posted: Mon Aug 01, 2005 21:04
by Anonymous
hey somebody, im trying to control the v-4 with a guitar via midi, but the only thing i can control is the source input, i would like to control the bmp, or other effects like, croma key or crossfade, someone knows if it's possible and how to do it?
tnx
Posted: Tue Aug 02, 2005 22:49
by VJair
is it a midi guitar or a midi convertor? what model/make is it? it sounds like you just need to transmit a different controller from the guitar to the v4, but i could be totally wrong...hehe