Resolume Forum

Oaktown wrote: Sun Sep 09, 2018 15:38 P2000 is more in line with GTX 1050ti or 1060. Also, th P series is more of for workstations so unless you can step up to the P6000, my recommendation would be to go with a GTX 1080ti and a Datapath FX4 to get 1 UI + 6 displays.

I will try with Blackmagic 4K input card and GTX1080Ti or P4000 to output.
I will mapping in this model with blending (kindly pls see the attached file) so that why I need 6 outputs independence.
With FX4 I cannot adjust for each output to match.
Many thanks,

I will try with Blackmagic 4K input card and GTX1080Ti or P4000 to output.

If you use more than one card, make sure your UI is connected to the better card.

With FX4 I cannot adjust for each output to match.

Of course you can! I do it all the time. Take a look at this video on my Vimeo channel:

Oaktown wrote: Sun Sep 09, 2018 16:08

I will try with Blackmagic 4K input card and GTX1080Ti or P4000 to output.

If you use more than one card, make sure your UI is connected to the better card.

With FX4 I cannot adjust for each output to match.

Of course you can! I do it all the time. Take a look at this video on my Vimeo channel:

phpBB [video]

Oh, i see, that great, thanks a lot for your sharing.
I will use GTX1080Ti with 3 outputs, 1 output 4K for FX4 (for 4 projectors) and 2 outputs FullHD.
I think this is the best way for now

I will use GTX1080Ti with 3 outputs, 1 output 4K for FX4 (for 4 projectors) and 2 outputs FullHD.

Use HDMI/DVI for your UI and DisplayPort for your FX4 and the other 2 outputs and you should be golden!