Page 1 of 1
Posted: Thu Apr 24, 2003 02:56
by adam_
i'm having real trouble getting the video capture to work with dual display on this card. it works fine in resolume with single display but no joy with double. i need to get it working fairly urgently, i'm doing a show on friday night. anyone have any ideas or had the same problem?
Posted: Mon Apr 28, 2003 10:16
by bart
can you be a little more specific? do you get an error message? or just white input?
Posted: Mon Apr 28, 2003 15:39
by D250_
I also have some problems with the Asus Gf4... video card, the picture from the capture device makes the output flicking, that means, random frames nearly every 6th are truncated nearly at the half picture , the upper left stays normal, the rest is moved to a random position. I use a webcam with composite input now to get a live picture, but the webcam can’t be forced to run at 640x480. ...D250.hu...
Posted: Mon Apr 28, 2003 15:43
by adam_
it seems to have sorted itself out. i changed a few settings and whatnot and it seems to work fine now. it's still glitchy.
i get the same problem with the truncated picture. all you have to do to sort that is add the 'light' effect from the generators list and put it to zero in that channel. it wont work if you apply it to the clip in the deck. you have to add it to the channel the vid is palying.
hope that helps