Page 1 of 1
Posted: Mon Jun 02, 2003 20:24
by Adry_
I've bought the Pocket Fader (Doepfer) to use on Resolume. But all the manual is in German. Is anybody know how to use this controller and can help me ?
Thanx !
Posted: Tue Jun 03, 2003 08:55
by bart
we do not have the pocket fader but it,s not just a case of connect and go? i though so ...
Posted: Wed Jun 04, 2003 11:49
by Adry_
I've found the english manual, but the controller doesn't run. It's not a USB. It work with midi plugs, and i've plug it on joystick. It's not very simple to configure...
Posted: Wed Jun 04, 2003 18:40
by komar_
try http://www.apak.netit's the dopfer importater in france,maybe they may help you
Posted: Fri Jun 06, 2003 21:10
by Adry_
What midi channels do Resolume use ? And how to select the good parameters on a midi controller ?? Help !!
Posted: Fri Jun 06, 2003 21:11
by Adry_
Apak.net give no answer to my mails...
Posted: Sat Jun 07, 2003 14:58
by Dan_
check out the midi assignment tab of the options window.
You just select the parameter you want to control and then move the relevent midi controller. It's as easy as that. You don't really need to understand midi at all to use it (but I would recommend that everyone learns at least the basics about midi)
Dan.
Posted: Sun Jun 08, 2003 11:39
by Adry_
Yes, I know, but with this controller, it's not so simple !
I've tried with a Evolution UC-16, and that's run very simply !
Posted: Sun Jun 08, 2003 11:39
by Adry_
Yes, I know, but with this controller, it's not so simple !
I've tried with a Evolution UC-16, and that's run very simply !