The 2 issues still left on this system seem to have started from the beginning (before any driver updates). I can't say for certain we saw the TDR error before, but we definitely had the Nvidia out of GPU memory issue before as well as the 1 output (1 out of 6 resolume outputs) that mysteriously keeps changing the mapping.
The images sent from the team at the casino show there's black areas at the top and far bottom right of the image/mapping. This is only coming from the resolume outputs. We have this going through a X7e from Rgb link and Crestron feeds coming into the same led element and none of the overlays seem to have an issue. I asked the people (Darcy and her team) at the casino, when the problem happens again, turn off the advanced output from resolume and see if the image fills up all the pixels (not mapped out, but the image does hit the whole screen). They did and the desktop fills all the pixels but when resolumes advanced output is put back on, the image/mapping is off. We have remapped it several times to make sure we have the mapping correct. It stays for a good week sometimes and then glitches to the mapping being off. It seems like the output on just this 1 part, every so often, pushes the image down. The way it is mapped is 4 slices to complete the circle (which is over their bar at the casino).
I have contacted Nvidia and they said to update windows fully, any drivers, and the bios. We are planning to do this to fix the Nvidia GPU error *hopefully*, but I'm still not sure how or why the mapping on just 1 output is changing, seemingly from Resolume advanced output. The rest of the outputs and content are fine. Just this 1 section jumps down.. sometimes its 2 or 3 pixels, sometimes is more like 50-100 pixels. Not sure if the GFX out of memory has anything to do with this or its a completely separate issue.