Resolume Forum

Zoltán wrote:You should be able to check this easily with Task manager's network monitor.

I've done that, and in one computer the internet bandwith keep stable, and in the other one it drops some to 0% and comeback.

not gigabite, only 100mbit
That could be the bottleneck then, when the graphics get moving fast.
A 1080p NDI stream can easily go over 100 megabits bandwidth.
You could try lowering the resolution, that would also make the NDI encoding easier on the sender, and the decoding on the receiver ...

Zoltán wrote:Is the network over 100BaseT or GbE?

not gigabite, only 100mbit

Hi guys, i've been using NDI TOOLS to get the image from the rekordbox video from the Dj resident (Via ethernet cable - Syphon to Spout NDI), and it works good, almost no delay.

But sometimes it freezes a bit. But no Fps loss. What can possible make this happen?

Best regards

Thanks for the help guys, here the result.

3X Projector Blend at 3840x800
1 SINGLE OUTPUT to a Video matrix (6 TVs + 2 Projectors)
https://drive.google.com/open?id=0B2fTv ... lFVZkJLMFk

Thanks for all the replys, i bought that cheap converter and will try and see if it works!

i know, but don't gonna work, 7 Tvs + 2 projectors screen ...

A scan? like what?

Im using a Gtx 1060 6gb. With 2 Display Port 2 Hdmi and 1 Dvi port.

Not sure.. but the matrix video is the Extron MAV SERIES 88 V (http://media.extron.com/product/panel/mav88v.gif)

Reggards

Thanks for the awnsers guys!

One more question, the matrix video uses as input BNC connectors, so the best way to connect to a pc is to convert Bnc To Vga and use a Display port To Vga Active Adapter?

Reggards