microKontrol loses half of its control

ecin · Post by **ecin** » Thu Jan 26, 2006 01:33

not sure if this is happening in resolume or the microKontrol but the 4x4 grid of drumpads seem to lose their functionality after playing for a bit. sometimes it happens in 5 minutes, sometimes in an hour. all other knobs, sliders & keys continue to work. i used to have the clips mapped to the keys & effects mapped to the 4x4 grid & it never lost control. now its reversed, 4x4 grid mapped to clips & keys mapped to effects & and i'm getting this problem

i'm wondering if its a setting in the microKontrol causing this.

anyone experienced something similar?

gpvillamil · Post by **gpvillamil** » Thu Jan 26, 2006 02:26

Yes. Occasionally Resolume seems to lose sight of some of the MIDI CC#s, especially #1. MIDIOX shows the signal coming and going out correctly, but Resolume doesn't see it. Remapping the MIDI controls in MIDIOX fixes this. (However, it is annoying, because I then have to change settings in other software that uses the MIDI control as well.)

ecin · Post by **ecin** » Thu Jan 26, 2006 02:36

thats what i thought though it still doesn't add up. i've been using the same controller on another machine with a different midi config flawlessly for over a year. i'll dig though the microKontrol settings and see if somethings interfering. the midi clock was causing problems before so who knows.

i'll check out MIDIOX if i can't solve it. considering i'm using that machine & controller for just resolume it shouldn't be an issue.