is my setup good ?

Adry_ · Post by **Adry_** » Sat Feb 22, 2003 17:03

I have a Duron 700Mhz
128 mb RAM
3dfx voodoo 3 3000 AGP 16mb
and an old PCI video card

Is this setup good for using Resolume ?

Jeremy_ · Post by **Jeremy_** » Sat Feb 22, 2003 19:30

... can you increase this a little ?
Duron 700 => today for 50 Euro you have a 1300mhz
128Ram... => your RAM will be used a lot in Resolume,
256Mb minimum, and try to use DDR
3dfx... 16mb, ...=> man you have to upgrade !
alo for 50 Euro you can have a GeForce 4 , 64Mb, AGP x4.
Regarding your old PCI: why not for the desk screen...

Adry_ · Post by **Adry_** » Mon Feb 24, 2003 23:24

Thanx 4 your answer...
What GeForce 4 exactly model must I buy ?
Can I keep the same motherboard (where is installed my 700 mhz) to install a 1300mhz CPU ?

Adry_ · Post by **Adry_** » Tue Feb 25, 2003 15:50

Is a GeForce2 MX400 64Mo correct to run Resolume ?

Adry_ · Post by **Adry_** » Tue Feb 25, 2003 15:53

Is DDR ram important ?

komart_ · Post by **komart_** » Thu Feb 27, 2003 11:28

if i was you,i 'd go for a matrox g 450,32mo,don't go for a g550,they don't work as well as the 450,for your motherboard,it depends of her capacity to upgrade,check their specs,DDR is important for the new Athlon,maybe not for the Duron,ask your favorite dealer

cman_ · Post by **cman_** » Sun Mar 02, 2003 03:11

I would choose certainly ddr ...Matrox 450 or 550 rather than GeForce... and your board probably dont have ddr slots...

murat ogan_ · Post by **murat ogan_** » Wed Mar 12, 2003 16:12

reply msg

murat ogan_ · Post by **murat ogan_** » Wed Mar 12, 2003 16:12

reply msg

poorVJ_ · Post by **poorVJ_** » Thu Mar 13, 2003 13:43

reply msg